Titanium 15 Degree Dentsply Ankylos Angled Dental Implants
Dentsply Ankylos® Titanium Angled Abutment 15°/25° Degree
Desciption:
This angled abutment comes with a screw that takes a 1.00mm hex driver
This abutment is designed for use with implants placed 1mm-1.5mm sub-gingivally. (Or according your customize request)
Angled abutments are available for cases where implants are not able to provide alignments leading to clinical parallelism.
15°/25° Angled Abutments in three cuff heights for pre-angulation.
Angled abutments are designed to be used with cemented prostheses.
They offer the clinician a wide range of three-dimensional options.
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* 1pc Screw Included
* Can production Custom interface
* Superior level of biocompatibility
Approved by CE, ISO 9001, ISO 13485
 | ANGLED
ABUTMENT | A | B | C | D |
| 22.048 | 15º | 2,52 | Cone ANK | 1,50 | 7,30 |
| 22.250 | 15º | 2,52 | Cone ANK | 3,00 | 6,60 |
| 23.048 | 25º | 2,52 | Cone ANK | 1,50 | 7,30 |
| 23.250 | 25º | 2,52 | Cone ANK | 3,00 | 6,60 |
Points of Dentsply Ankylos® C/X Angled Abutment:
Fig. 3
Standard titanium abutments are intended for the abutment level impression technique and are produced with four variables; abutment diameter (Fig.3, left, 3.3mm "A", 4.5mm "B"), collar height (1.5, 3.0, 4.5, 6.0mm), abutment height (Fig.3, middle, 4mm, 6mm) and angulation (Fig.3, right, 0°, 15°). Straight abutments are machined as a unibody (screw and abutment are one singular piece) while angled abutments are manufactured as a two piece component with a permanently trapped screw.
Product Tags:
|
|
Dentsply Ankylos® Titanium Angled Abutment 15°/25° Degree Images
|
